### jgobat 04/05/21 04:40:25
+++ cmdfile (383 bytes, 239364671 checksum)
$T_MISSION,75
$T_DIVE,60
$D_ABORT,200
$D_TGT,180
$N_DIVES,50
$D_NO_BLEED,50
$MASS,72565
$RHO,1.023
$T_NO_W,120
$PITCH_ADJ_GAIN,0.045
$PITCH_ADJ_DBAND,2
$AH0_24V,550
$D_BOOST,0
$SM_CC,650
$C_VBD,2800
$ALTIM_PING_DEPTH,120
$ALTIM_PING_DELTA,10
$ALTIM_PULSE,1
$ALTIM_SENSITIVITY,3
$ALTIM_FREQUENCY,13
$PROTOCOL,9
$PHONE_DEVICE,33 
$N_NOCOMM,10
$MAX_BUOY,100
$SM_CC,100
$USE_BATHY,6
$GO
--- validation against - (latest dive is 0)
Value of $T_MISSION will be set to 75.
WARNING! $T_MISSION,75.0000: Must be less than $T_ABORT!
Value of $T_DIVE will be set to 60.
Value of $D_ABORT will be set to 200.
Value of $D_TGT will be set to 180.
Value of $N_DIVES will be set to 50.
Value of $D_NO_BLEED will be set to 50.
Value of $MASS will be set to 72565.
Value of $RHO will be set to 1.023.
Value of $T_NO_W will be set to 120.
Value of $PITCH_ADJ_GAIN will be set to 0.045.
Value of $PITCH_ADJ_DBAND will be set to 2.
Value of $AH0_24V will be set to 550.
WARNING! $AH0_24V,550.0000: Recommended range is between 0.0000 and 400.0000!
Value of $D_BOOST will be set to 0.
Value of $SM_CC will be set to 650.
Value of $C_VBD will be set to 2800.
WARNING! $C_VBD,2800.0000: Center must be between HW min and max!
Value of $ALTIM_PING_DEPTH will be set to 120.
Value of $ALTIM_PING_DELTA will be set to 10.
Value of $ALTIM_PULSE will be set to 1.
Value of $ALTIM_SENSITIVITY will be set to 3.
Value of $ALTIM_FREQUENCY will be set to 13.
Value of $PROTOCOL will be set to 9.
Value of $PHONE_DEVICE will be set to 33.
Value of $N_NOCOMM will be set to 10.
Value of $MAX_BUOY will be set to 100.
Value of $SM_CC will be set to 100.
WARNING! $SM_CC,100.0000: Value must be between 150.0000 and 800.0000!
Value of $USE_BATHY will be set to 6.
T_ABORT (0.000000) must not be <= T_MISSION (75.000000)
$GO given - will continue in current mode
### jgobat 04/05/21 05:09:54
+++ cmdfile (395 bytes, 611790580 checksum)
$T_MISSION,75
$T_DIVE,60
$D_ABORT,200
$D_TGT,180
$N_DIVES,50
$D_NO_BLEED,50
$MASS,72565
$RHO,1.023
$T_NO_W,120
$PITCH_ADJ_GAIN,0.045
$PITCH_ADJ_DBAND,2
$AH0_24V,550
$D_BOOST,0
$SM_CC,650
$C_VBD,2800
$ALTIM_PING_DEPTH,120
$ALTIM_PING_DELTA,10
$ALTIM_PULSE,1
$ALTIM_SENSITIVITY,3
$ALTIM_FREQUENCY,13
$PROTOCOL,9
$PHONE_DEVICE,33 
$N_NOCOMM,10
$MAX_BUOY,100
$SM_CC,100
$USE_BATHY,6
$MAXI_24V,5
$GO
--- validation against - (latest dive is 0)
Value of $T_MISSION will be set to 75.
WARNING! $T_MISSION,75.0000: Must be less than $T_ABORT!
Value of $T_DIVE will be set to 60.
Value of $D_ABORT will be set to 200.
Value of $D_TGT will be set to 180.
Value of $N_DIVES will be set to 50.
Value of $D_NO_BLEED will be set to 50.
Value of $MASS will be set to 72565.
Value of $RHO will be set to 1.023.
Value of $T_NO_W will be set to 120.
Value of $PITCH_ADJ_GAIN will be set to 0.045.
Value of $PITCH_ADJ_DBAND will be set to 2.
Value of $AH0_24V will be set to 550.
WARNING! $AH0_24V,550.0000: Recommended range is between 0.0000 and 400.0000!
Value of $D_BOOST will be set to 0.
Value of $SM_CC will be set to 650.
Value of $C_VBD will be set to 2800.
WARNING! $C_VBD,2800.0000: Center must be between HW min and max!
Value of $ALTIM_PING_DEPTH will be set to 120.
Value of $ALTIM_PING_DELTA will be set to 10.
Value of $ALTIM_PULSE will be set to 1.
Value of $ALTIM_SENSITIVITY will be set to 3.
Value of $ALTIM_FREQUENCY will be set to 13.
Value of $PROTOCOL will be set to 9.
Value of $PHONE_DEVICE will be set to 33.
Value of $N_NOCOMM will be set to 10.
Value of $MAX_BUOY will be set to 100.
Value of $SM_CC will be set to 100.
WARNING! $SM_CC,100.0000: Value must be between 150.0000 and 800.0000!
Value of $USE_BATHY will be set to 6.
Value of $MAXI_24V will be set to 5.
T_ABORT (0.000000) must not be <= T_MISSION (75.000000)
$GO given - will continue in current mode
### jgobat 04/05/21 05:10:07
+++ cmdfile (399 bytes, 249212942 checksum)
$T_MISSION,75
$T_DIVE,60
$D_ABORT,200
$D_TGT,180
$N_DIVES,50
$D_NO_BLEED,50
$MASS,72565
$RHO,1.023
$T_NO_W,120
$PITCH_ADJ_GAIN,0.045
$PITCH_ADJ_DBAND,2
$AH0_24V,550
$D_BOOST,0
$SM_CC,650
$C_VBD,2800
$ALTIM_PING_DEPTH,120
$ALTIM_PING_DELTA,10
$ALTIM_PULSE,1
$ALTIM_SENSITIVITY,3
$ALTIM_FREQUENCY,13
$PROTOCOL,9
$PHONE_DEVICE,33 
$N_NOCOMM,10
$MAX_BUOY,100
$SM_CC,100
$USE_BATHY,6
$MAXI_24V,5
$RESUME
--- validation against - (latest dive is 0)
Value of $T_MISSION will be set to 75.
WARNING! $T_MISSION,75.0000: Must be less than $T_ABORT!
Value of $T_DIVE will be set to 60.
Value of $D_ABORT will be set to 200.
Value of $D_TGT will be set to 180.
Value of $N_DIVES will be set to 50.
Value of $D_NO_BLEED will be set to 50.
Value of $MASS will be set to 72565.
Value of $RHO will be set to 1.023.
Value of $T_NO_W will be set to 120.
Value of $PITCH_ADJ_GAIN will be set to 0.045.
Value of $PITCH_ADJ_DBAND will be set to 2.
Value of $AH0_24V will be set to 550.
WARNING! $AH0_24V,550.0000: Recommended range is between 0.0000 and 400.0000!
Value of $D_BOOST will be set to 0.
Value of $SM_CC will be set to 650.
Value of $C_VBD will be set to 2800.
WARNING! $C_VBD,2800.0000: Center must be between HW min and max!
Value of $ALTIM_PING_DEPTH will be set to 120.
Value of $ALTIM_PING_DELTA will be set to 10.
Value of $ALTIM_PULSE will be set to 1.
Value of $ALTIM_SENSITIVITY will be set to 3.
Value of $ALTIM_FREQUENCY will be set to 13.
Value of $PROTOCOL will be set to 9.
Value of $PHONE_DEVICE will be set to 33.
Value of $N_NOCOMM will be set to 10.
Value of $MAX_BUOY will be set to 100.
Value of $SM_CC will be set to 100.
WARNING! $SM_CC,100.0000: Value must be between 150.0000 and 800.0000!
Value of $USE_BATHY will be set to 6.
Value of $MAXI_24V will be set to 5.
T_ABORT (0.000000) must not be <= T_MISSION (75.000000)
$RESUME given - will start or continue diving
### jgobat 04/05/21 05:28:59
+++ cmdfile (408 bytes, 1974439546 checksum)
$T_MISSION,75
$T_DIVE,60
$D_ABORT,200
$D_TGT,180
$N_DIVES,50
$D_NO_BLEED,50
$MASS,72565
$RHO,1.023
$T_NO_W,120
$PITCH_ADJ_GAIN,0.045
$PITCH_ADJ_DBAND,2
$AH0_24V,550
$D_BOOST,0
$SM_CC,650
$C_VBD,2800
$ALTIM_PING_DEPTH,120
$ALTIM_PING_DELTA,10
$ALTIM_PULSE,1
$ALTIM_SENSITIVITY,3
$ALTIM_FREQUENCY,13
$PROTOCOL,9
$PHONE_DEVICE,33 
$N_NOCOMM,10
$MAX_BUOY,100
$SM_CC,100
$USE_BATHY,6
$MAXI_24V,5
$T_RSLEEP,15
$GO
--- validation against /home/seaglider/sg249/p2490001.log (latest dive is 1)
Value of $SM_CC will change from 100 to 650.
Value of $SM_CC will change from 650 to 100.
WARNING! $SM_CC,100.0000: Value must be between 150.0000 and 800.0000!
Value of $MAXI_24V will change from 3 to 5.
Value of $T_RSLEEP will change from 3 to 15.
$GO given - will continue in current mode
### jgobat 04/05/21 18:48:21
+++ cmdfile (423 bytes, 1149775247 checksum)
$T_MISSION,75
$T_DIVE,60
$D_ABORT,200
$D_TGT,180
$N_DIVES,50
$D_NO_BLEED,50
$MASS,72565
$RHO,1.023
$T_NO_W,120
$PITCH_ADJ_GAIN,0.045
$PITCH_ADJ_DBAND,2
$AH0_24V,550
$D_BOOST,0
$SM_CC,650
$C_VBD,2800
$ALTIM_PING_DEPTH,120
$ALTIM_PING_DELTA,10
$ALTIM_PULSE,1
$ALTIM_SENSITIVITY,3
$ALTIM_FREQUENCY,13
$PROTOCOL,9
$PHONE_DEVICE,33 
$N_NOCOMM,10
$MAX_BUOY,100
$SM_CC,100
$USE_BATHY,6
$MAXI_24V,5
$T_RSLEEP,15
$SIM_W,0.1
$RESUME
--- validation against - (latest dive is 0)
Value of $T_MISSION will be set to 75.
WARNING! $T_MISSION,75.0000: Must be less than $T_ABORT!
Value of $T_DIVE will be set to 60.
Value of $D_ABORT will be set to 200.
Value of $D_TGT will be set to 180.
Value of $N_DIVES will be set to 50.
Value of $D_NO_BLEED will be set to 50.
Value of $MASS will be set to 72565.
Value of $RHO will be set to 1.023.
Value of $T_NO_W will be set to 120.
Value of $PITCH_ADJ_GAIN will be set to 0.045.
Value of $PITCH_ADJ_DBAND will be set to 2.
Value of $AH0_24V will be set to 550.
WARNING! $AH0_24V,550.0000: Recommended range is between 0.0000 and 400.0000!
Value of $D_BOOST will be set to 0.
Value of $SM_CC will be set to 650.
Value of $C_VBD will be set to 2800.
WARNING! $C_VBD,2800.0000: Center must be between HW min and max!
Value of $ALTIM_PING_DEPTH will be set to 120.
Value of $ALTIM_PING_DELTA will be set to 10.
Value of $ALTIM_PULSE will be set to 1.
Value of $ALTIM_SENSITIVITY will be set to 3.
Value of $ALTIM_FREQUENCY will be set to 13.
Value of $PROTOCOL will be set to 9.
Value of $PHONE_DEVICE will be set to 33.
Value of $N_NOCOMM will be set to 10.
Value of $MAX_BUOY will be set to 100.
Value of $SM_CC will be set to 100.
WARNING! $SM_CC,100.0000: Value must be between 150.0000 and 800.0000!
Value of $USE_BATHY will be set to 6.
Value of $MAXI_24V will be set to 5.
Value of $T_RSLEEP will be set to 15.
Value of $SIM_W will be set to 0.1.
T_ABORT (0.000000) must not be <= T_MISSION (75.000000)
$RESUME given - will start or continue diving